Quick Guide to AZTECH CPE - DSL5028EN(1T1R)

Aztech CPE
Model :  DSL5028EN(1T1R)
       ADSL2+ 4-Port 150Mbps Wireless-N
               Modem Router









Quick Setup Guide

Quick Guide to AZTECH ADSL2+ DSL5018EN (1T1R)

Aztech ADSL2+ 150Mbps WIRELESS-N
4-Ports Modem Router
Model :  Wireless N  DSL5018EN(1T1R)

Default IP Address: 192.168.1.1
Note:  you have to synchronized the modem with DSLAM before accessing via web browser




Router Mode Configuration
+  Click Network Button
     +  Click Internet menu
        -  Select Activated as Status
        -  Select VPI/VCI
        -  Select Static as Connection Type
        -  Select 1483 Bridged IP LLC as encapsulation
        -  Select Yes as Default Route
        -  Enter Point-To-Point or WAN IP
            * IP Address
            * Subnet Mask
            * Gateway
            * DNS
        -  Select enable NAT
        -  then click Apply button

     +  Click Local menu
        - enter LAN IP in Router IP Address box
        - enter the LAN Subnet mask
        - Select Enable/Disable DHCP Server
        - Then click Apply button

+  Click System Button
     -  click reboot button under reboot menu


For Wireless Configuration

+ Click Wireless button
     - Select enable wireless
     - Enter desire SSID Name
     - Select enable Broadcast SSID
     - Select 802.11b+g+n wireless mode
     - Left all setting as-is
     - then click Apply button

+ Click Secuity menu
     - Select WPA-PSK/WPA2-PSK as security mode
     - Select TKIP/AES combination as Encryption
     - Enter preshared key for Wifi Password
     - then click Apply button

for Advance setup configuration, leave your comment here

*That's it

Quick Guide for KASDA (KD212) DSL Modem

Kasda  KD212

A sample router mode configuration for this type of DSL Modem.



+ Click Advance Setup menu
    + Click  Layer2 Interface
        - Click ATM Interface
        - Use VPI/VCI define by ISP
        - Select Path0 as DSL Latency
        - Select EoA as DSL Link
        - Select Default Mode as Connection Mode
        - Select LLC/SNAP-BRIDGING as encapsulation mode
        - Select UBR without PCR as Service Category
        - Select Strict Priority as IP QoS Scheduler Algorithm
        - Then click Apply/Save button
    + Select WAN Service
        - Click Add Button
        - Select a Layer2 Interface that previously configured then click 
          Next button
        - Select IP over Ethernet then click Next button
        - Select Static IP Address then input the WAN IP address or Point-to-Point 
          IP Address given by  ISP then click Next button
        - Select Enable NAT, Enable Firewall (optional) then click Next button
        - Click Next for Routing – Default gateway
        - Enter ISP DNS Server then click Next button
        - Click Apply/Save button
    + Select LAN 
        - Write down first usable IP Address given by ISP and the corresponding 
          subnet mask.
        - Disable/Enable DHCP server depending on client configuration then click 
          Apply/Save button
+ Click Management menu
    - Click Reboot menu and reboot button.
    - Test the modem after rebooting and insync with the DSLAM.

Quick Guide to ZTE 831 ADSL Modem

Quick Guide to ZTE 831 ADSL Modem

PTI ADSL Router Quick Start Guide

Requirements: You must have an Ethernet network card installed.
                      You must have the Windows TCP/IP protocol properly setup.
                      You must connect cables properly.

DSL Connection Troubleshooting Tips

You don’t need to be a Technical Expert to check your DSL connection. This will teach you a firsthand troubleshooting for your DSL connection. Follow the simple steps to common problems, it is usually associated with the Indicator lights on the front of the modem.