Quick Guide for KASDA (KD212) DSL Modem

Kasda  KD212

A sample router mode configuration for this type of DSL Modem.



+ Click Advance Setup menu
    + Click  Layer2 Interface
        - Click ATM Interface
        - Use VPI/VCI define by ISP
        - Select Path0 as DSL Latency
        - Select EoA as DSL Link
        - Select Default Mode as Connection Mode
        - Select LLC/SNAP-BRIDGING as encapsulation mode
        - Select UBR without PCR as Service Category
        - Select Strict Priority as IP QoS Scheduler Algorithm
        - Then click Apply/Save button
    + Select WAN Service
        - Click Add Button
        - Select a Layer2 Interface that previously configured then click 
          Next button
        - Select IP over Ethernet then click Next button
        - Select Static IP Address then input the WAN IP address or Point-to-Point 
          IP Address given by  ISP then click Next button
        - Select Enable NAT, Enable Firewall (optional) then click Next button
        - Click Next for Routing – Default gateway
        - Enter ISP DNS Server then click Next button
        - Click Apply/Save button
    + Select LAN 
        - Write down first usable IP Address given by ISP and the corresponding 
          subnet mask.
        - Disable/Enable DHCP server depending on client configuration then click 
          Apply/Save button
+ Click Management menu
    - Click Reboot menu and reboot button.
    - Test the modem after rebooting and insync with the DSLAM.