Quick Guide to AZTECH CPE - DSL5028EN(1T1R)

Aztech CPE
Model :  DSL5028EN(1T1R)
       ADSL2+ 4-Port 150Mbps Wireless-N
               Modem Router









Quick Setup Guide

Quick Guide to AZTECH ADSL2+ DSL5018EN (1T1R)

Aztech ADSL2+ 150Mbps WIRELESS-N
4-Ports Modem Router
Model :  Wireless N  DSL5018EN(1T1R)

Default IP Address: 192.168.1.1
Note:  you have to synchronized the modem with DSLAM before accessing via web browser




Router Mode Configuration
+  Click Network Button
     +  Click Internet menu
        -  Select Activated as Status
        -  Select VPI/VCI
        -  Select Static as Connection Type
        -  Select 1483 Bridged IP LLC as encapsulation
        -  Select Yes as Default Route
        -  Enter Point-To-Point or WAN IP
            * IP Address
            * Subnet Mask
            * Gateway
            * DNS
        -  Select enable NAT
        -  then click Apply button

     +  Click Local menu
        - enter LAN IP in Router IP Address box
        - enter the LAN Subnet mask
        - Select Enable/Disable DHCP Server
        - Then click Apply button

+  Click System Button
     -  click reboot button under reboot menu


For Wireless Configuration

+ Click Wireless button
     - Select enable wireless
     - Enter desire SSID Name
     - Select enable Broadcast SSID
     - Select 802.11b+g+n wireless mode
     - Left all setting as-is
     - then click Apply button

+ Click Secuity menu
     - Select WPA-PSK/WPA2-PSK as security mode
     - Select TKIP/AES combination as Encryption
     - Enter preshared key for Wifi Password
     - then click Apply button

for Advance setup configuration, leave your comment here

*That's it

Quick Guide to ZTE H108N ADSL Modem

ZTE ADSL MODEM
Model: ZXHN H108N Series

Default IP Address :  192.168.1.1








+ Click the Quick Setup Guide menu
     -  Type a desired Connection Name
     -  Create or Select Preconfigure VPI/VCI
     -  Select Connection Type, Route or Bridge
         since we will configure Router Modem, select Route mode
     -  Select IP as link type
     -  Select Static as IP Type
     -  Select IPV4 box and enter the Point-to-point IP Address
        or the WAN IP Address and DNS
     -  then click next button
     -  Select or Disable/Enable RF Radio then click Next button
     -  Leave Admin User/Password as-is or modify to your configuration
+  Click Network Menu
     -  Delete all Connection name and left the recently configured
        Wan Connection for PATH-WAN-WAN Connection
     -  Select LAN menu
     -  Enter the LAN iP Address
     -  Select Disable/Enable DHCP Server
     -  Click Submit button
+  Click SSID Settings under Network/WLAN menu
     -  Choose SSID name
     -  Enable the SSID Number
     -  Select Maximum clients to 16
     -  Configure a desire SSID Name for a particular SSID Number
     -  Repeat configuration for SSID 2 - 4 if enabled
+  If DHCP server is enable
     +  Configure the DHCP IP Address
          -  DHCP Start IP Address :  192.168.1.100 (e.g.)
          -  DHCP Stop IP Address :  192.168.1.116 (e.g.)
     -  Click DHCP Port Service under Network/LAN menu
     -  Click SSID 1 to 4 (try to configure Start/Stop IP with 16 IP
        per SSID if all SSID was selected)
+  Click Routing (IPV4)
     -  Select WAN Connection name then click Submit button.
+  Select the Firewall under Security menu
     -  click enable Anti-Hacking Protection
     -  Select Firewall level to Low or desired protection

Quick Guide for KASDA (KD212) DSL Modem

Kasda  KD212

A sample router mode configuration for this type of DSL Modem.



+ Click Advance Setup menu
    + Click  Layer2 Interface
        - Click ATM Interface
        - Use VPI/VCI define by ISP
        - Select Path0 as DSL Latency
        - Select EoA as DSL Link
        - Select Default Mode as Connection Mode
        - Select LLC/SNAP-BRIDGING as encapsulation mode
        - Select UBR without PCR as Service Category
        - Select Strict Priority as IP QoS Scheduler Algorithm
        - Then click Apply/Save button
    + Select WAN Service
        - Click Add Button
        - Select a Layer2 Interface that previously configured then click 
          Next button
        - Select IP over Ethernet then click Next button
        - Select Static IP Address then input the WAN IP address or Point-to-Point 
          IP Address given by  ISP then click Next button
        - Select Enable NAT, Enable Firewall (optional) then click Next button
        - Click Next for Routing – Default gateway
        - Enter ISP DNS Server then click Next button
        - Click Apply/Save button
    + Select LAN 
        - Write down first usable IP Address given by ISP and the corresponding 
          subnet mask.
        - Disable/Enable DHCP server depending on client configuration then click 
          Apply/Save button
+ Click Management menu
    - Click Reboot menu and reboot button.
    - Test the modem after rebooting and insync with the DSLAM.

PTI ADSL Router Quick Start Guide

Requirements: You must have an Ethernet network card installed.
                      You must have the Windows TCP/IP protocol properly setup.
                      You must connect cables properly.