Aztech ADSL2+ 150Mbps WIRELESS-N
4-Ports Modem Router
Model : Wireless N DSL5018EN(1T1R)
Default IP Address: 192.168.1.1
Note: you have to synchronized the modem with DSLAM before accessing via web browser
Router Mode Configuration
+ Click Network Button
+ Click Internet menu
- Select Activated as Status
- Select VPI/VCI
- Select Static as Connection Type
- Select 1483 Bridged IP LLC as encapsulation
- Select Yes as Default Route
- Enter Point-To-Point or WAN IP
* IP Address
* Subnet Mask
* Gateway
* DNS
- Select enable NAT
- then click Apply button
+ Click Local menu
- enter LAN IP in Router IP Address box
- enter the LAN Subnet mask
- Select Enable/Disable DHCP Server
- Then click Apply button
+ Click System Button
- click reboot button under reboot menu
For Wireless Configuration
+ Click Wireless button
- Select enable wireless
- Enter desire SSID Name
- Select enable Broadcast SSID
- Select 802.11b+g+n wireless mode
- Left all setting as-is
- then click Apply button
+ Click Secuity menu
- Select WPA-PSK/WPA2-PSK as security mode
- Select TKIP/AES combination as Encryption
- Enter preshared key for Wifi Password
- then click Apply button
for Advance setup configuration, leave your comment here
*That's it