Quick Guide to ZTE H108N ADSL Modem

ZTE ADSL MODEM
Model: ZXHN H108N Series

Default IP Address :  192.168.1.1








+ Click the Quick Setup Guide menu
     -  Type a desired Connection Name
     -  Create or Select Preconfigure VPI/VCI
     -  Select Connection Type, Route or Bridge
         since we will configure Router Modem, select Route mode
     -  Select IP as link type
     -  Select Static as IP Type
     -  Select IPV4 box and enter the Point-to-point IP Address
        or the WAN IP Address and DNS
     -  then click next button
     -  Select or Disable/Enable RF Radio then click Next button
     -  Leave Admin User/Password as-is or modify to your configuration
+  Click Network Menu
     -  Delete all Connection name and left the recently configured
        Wan Connection for PATH-WAN-WAN Connection
     -  Select LAN menu
     -  Enter the LAN iP Address
     -  Select Disable/Enable DHCP Server
     -  Click Submit button
+  Click SSID Settings under Network/WLAN menu
     -  Choose SSID name
     -  Enable the SSID Number
     -  Select Maximum clients to 16
     -  Configure a desire SSID Name for a particular SSID Number
     -  Repeat configuration for SSID 2 - 4 if enabled
+  If DHCP server is enable
     +  Configure the DHCP IP Address
          -  DHCP Start IP Address :  192.168.1.100 (e.g.)
          -  DHCP Stop IP Address :  192.168.1.116 (e.g.)
     -  Click DHCP Port Service under Network/LAN menu
     -  Click SSID 1 to 4 (try to configure Start/Stop IP with 16 IP
        per SSID if all SSID was selected)
+  Click Routing (IPV4)
     -  Select WAN Connection name then click Submit button.
+  Select the Firewall under Security menu
     -  click enable Anti-Hacking Protection
     -  Select Firewall level to Low or desired protection