Quick Guide to AZTECH ADSL2+ DSL5018EN (1T1R)


Aztech ADSL2+ 150Mbps WIRELESS-N
4-Ports Modem Router
Model :  Wireless N  DSL5018EN(1T1R)

Default IP Address: 192.168.1.1
Note:  you have to synchronized the modem with DSLAM before accessing via web browser




Router Mode Configuration
+  Click Network Button
     +  Click Internet menu
        -  Select Activated as Status
        -  Select VPI/VCI
        -  Select Static as Connection Type
        -  Select 1483 Bridged IP LLC as encapsulation
        -  Select Yes as Default Route
        -  Enter Point-To-Point or WAN IP
            * IP Address
            * Subnet Mask
            * Gateway
            * DNS
        -  Select enable NAT
        -  then click Apply button

     +  Click Local menu
        - enter LAN IP in Router IP Address box
        - enter the LAN Subnet mask
        - Select Enable/Disable DHCP Server
        - Then click Apply button

+  Click System Button
     -  click reboot button under reboot menu


For Wireless Configuration

+ Click Wireless button
     - Select enable wireless
     - Enter desire SSID Name
     - Select enable Broadcast SSID
     - Select 802.11b+g+n wireless mode
     - Left all setting as-is
     - then click Apply button

+ Click Secuity menu
     - Select WPA-PSK/WPA2-PSK as security mode
     - Select TKIP/AES combination as Encryption
     - Enter preshared key for Wifi Password
     - then click Apply button

for Advance setup configuration, leave your comment here

*That's it


No comments:

Post a Comment